For years, mega datacenters had extensively used flash storage for achieving speed, whether in cache and database applications, or even nearly as boot drives. Yet, the exponential growth of data in all kind of predictions indicates the amount doubles every two years, and a 50-fold growth from 2010 to 2020. Therefore, to keep up with this growth is a critical challenge to datacenters.
J80F is the best disaggregate flash storage solution to increase the operational efficiency for datacenters. Featuring up to eighty PCIe 3.0 NVMe SSDs in a standard 19” 3U chassis, J80F supports flexible deployment of extreme density or multiple hosts. It benefits datacenters to better scale out the flash capacity across multiple applications and fine-tune the compute-to-storage ratio. The series presents,
Ultra Density 3U Hot Storage JBOF (Just a Bunch of Flash) :
NVMe could perform much greater IO bandwidth and lower latency than SATA and SAS, which makes it the best choice for hot storage applications among hyper-scale datacenters. A single J80F system carries up to eighty NMVe drives in total, and operates just the same as SAS/SATA JBOD.
Flexibility in Expansion Deployment :
J80F supports multiple switch configurations with embedded PMC SoC, which allows deployments of various SSD configurations and flexible mappings between host node and SSDs without a hardware change. By up to five multiple head node support, the compute-to-storage ratio of the system could be easily redefined by adjusting switch configurations.
Superior CAPEX and OPEX Saving :
With J80F, it is easy to achieve high CPU to SSD ratio without being limited to the building block of servers. The whole system design supports hot-swap serviceability, fan and PSU redundancy, as well as tool-less SSD installation and replacement, which saves time and expenses with trust-worthy reliability.